© 2024 Center for Digital Innovation and AI. Created for free using WordPress and Kubio
- Page d’accueil
- Gestion de son espace
- Activities
- Activité Test
Création de l’activité testFeeding the question bankParamétrage d’un test en ligne à distanceParamétrage d’un test en ligne en présentielAdding question to quiz manuallyRandomly add questions to quizBlock concurrent connectionsUser overridesMélanger les questions d’une ou plusieurs sectionsin case of connection lost
- Notification
- Online Evaluation Checklist
L’activité Choix de Groupe est utilisée pour permettre aux étudiants de s’inscrire eux-mêmes dans leurs propres groupes. Les réponses des étudiants peuvent être anonymes ou pas.
It is recommended to follow the steps below to ensure the correct approach to the implementation of the “Group Choice” activity.
- First of all, you must identify the elements below of the “Group Choice” activity (in a Word file)
- The purpose of this activity (i.e. why use “Group Choice”).
- The title and a brief description of this activity.
- The number of groups the student can join.
- The date of opening and closing of the activity.
- Whether the results are published or not. If so, it is possible to :
- Publish the results that are visible to students as soon as they provide their answers, after the activity close date or always display the results.
- Publish the full results (ie show the names of the students and their choices) or anonymous (i.e. show only the choices without the names of the students).
- If students can change their choices.
- Whether to limit the number of registrants to each group or not (i.e. each group cannot contain more than x students)
- After having identified the elements of this activity, we move on to the application. It is then necessary, first of all, to create the groups and then to create the activity "Choice of the group" and to configure it.
- Lancement de l’activité « Group choice "
- Vue d’ensemble des groupes
- Restreindre l’accès
Remark : L’activité ne peut plus être modifiée dès qu’un seul étudiant fournit une réponse. C’est pour cela et comme bonne pratique, il faut s’assurer qu’il n’y aucune modification à apporter à l’activité, avant de la lancer. Cependant, si une modification s’impose (par exemple, augmenter le nombre de groupes, modifier le nombre maximal d’inscrits dans un groupe, etc.), dans ce cas, il faut supprimer toutes les réponses des étudiants et relancer l’activité.
A. CREATING GROUPS
- Access your course by clicking on “My courses” label in the “Navigation” block then select your course
- Cliquez sur « users » dans le bloc « administration du cours » et puis cliquez sur « Groupes "
- Cliquer sur « Créer des groupes automatiquement "
- Saisissez le schéma de dénomination. Par exemple, Groupe @ ou Groupe #
- Choisissez l’option « Nombre de groupes "
- Enter the number of groups to create.
- Choose « pas d’attribution » dans le champ répartir les membres pour ne pas inscrire des membres à ces groups (i.e. ces groups vont être vides.)
- Cliquez sur « Send "
B. CREATING THE GROUP CHOICE ACTIVITY IN YOUR COURSE
- Access your course by clicking on “My courses” label in the “Navigation” block then select your course
- Activate the editing mode by clicking on the "Turn Editing On"
- Create the “Group choice” activity , by clicking on “Add an activity or a resource”
- Choose “Group choice” and click on the “Add” button
C. SETTINGS OF THE GROUP CHOICE ACTIVITY
To configure the Group Choice activity, follow the steps below :
GENERAL
- Saisissez un nom à votre activité
- Saisissez une description à votre activité, qui devrait inclure des instructions précises pour les étudiants
MISCELLANEOUS SETTINGS
-
- Allow enrollment to multiple groups
- Publish Results: Choose of the following options :
- Do not publish results to students (In this case, the "Privacy of results" field will be disabled)
- Show results to students after they answer
- Show results to students only after the choice is closed
- Always show results to students
- Privacy of results : Choose of the following options :
- Publish anonymous results, do not show student names
- Publish full results, showing names and their choices
-
- Allow choice to be updated
- Limit the number of responses allowed. If enabled, enter the general limitation (i.e. the maximum number of subscribers to a group)
- Sélectionnez les groups disponibles et cliquez sur “Ajouter les groupes“
- Cliquez sur le bouton “Appliquer à tous les groupes“
-
- Activate the Restrict answering to this time period to choose an opening date and a closing date
N’oubliez pas de cliquer le bouton « Save and display "
D. OVERVIEW OF GROUPS
Il y a trois façons d’utiliser les groupes :
- Pas de groupe : Il n’y a pas de groupes, tout le monde fait partie d’une seule communauté.
- Groupes séparés : Chaque groupe ne peut voir que son propre groupe, les contributions aux activités des membres des autres groupes étant invisibles. Attention, cela ne signifie pas que l’activité ne sera accessible qu’aux membres de tel ou tel groupe, mais plutôt que l’activité étant accessible à tous les membres du cours quel que soit leur groupe les membres du groupe A ne pourront pas consulter les contributions des membres du groupe B. Si l’on souhaite réserver une activité particulière (et des ressources spécifiques) à un groupe particulier il faut passer par les groupements.
- Groupes visibles : Chaque utilisateur ne contribue qu’au sein de son propre groupe, mais les contributions des membres des autres groupes sont visibles en lecture seule.
Group types can be defined at two levels:
-
- Activité : – On peut définir le type des groupes au niveau de chaque activité qui supporte les groupes.
Dans le bloc “Administration du (l’activité)” à gauche, cliquez sur “Paramètres“, puis choisissez le mode de groupe
N’oubliez pas de cliquer sur « Save and display "
-
- Cours : – Lorsque le type des groupes est fixé au niveau du cours, il devient le type par défaut pour toutes les activités du cours. Toutefois, si « Imposer le type des groupes » a été fixé, Moodle ignore le type des groupes défini dans les activités.
In the bloc “course administration” on the left, click on “Settings“
-
-
- Choose group mode
- Choose if you want to force group mode
-
N’oubliez pas de cliquer sur « Save and display "
E. RESTREINDRE L’ACCES
If you place a restriction on a resource only for a group, only members of that group will be able to access the resource.
Dans le bloc “Administration du (l’activité)” à gauche, cliquez sur “Paramètres“, puis choisissez le mode de groupe
- Cliquez sur “Ajouter une restriction“
- Cliquez sur “Groupe“
- Choose the suitable group
- Cliquez sur le symbole “œil” pour rendre l’activité visible uniquement aux memmbre du groupe séléctionné
N’oubliez pas de cliquer sur « Save and display "
The Group Choice activity is used to allow students to register themselves in their own groups. Student responses may or may not be anonymous.
It is recommended to follow the steps below to ensure the correct approach to the implementation of the “Group Choice” activity.
- First of all, you must identify the elements below of the “Group Choice” activity (in a Word file)
- The purpose of this activity (i.e. why use “Group Choice”).
- The title and a brief description of this activity.
- The number of groups the student can join.
- The date of opening and closing of the activity.
- Whether the results are published or not. If so, it is possible to :
- Publish the results that are visible to students as soon as they provide their answers, after the activity close date or always display the results.
- Publish the full results (ie show the names of the students and their choices) or anonymous (i.e. show only the choices without the names of the students).
- If students can change their choices.
- Whether to limit the number of registrants to each group or not (i.e. each group cannot contain more than x students)
- After having identified the elements of this activity, we move on to the application. It is then necessary, first of all, to create the groups and then to create the activity “Choice of the group” and to configure it.
- Launch of the “group selection“
- Overview of groups
- Restrict access
Remark: The activity can no longer be edited once a single student provides a response. It is for this and as a good practice, it is necessary to make sure that there is no modification to be made to the activity, before launching it. However, if a modification is required (for example, increasing the number of groups, modifying the maximum number of registered members in a group, etc.), in this case, all student responses must be deleted and the activity restarted.
A. CREATING GROUPS
- Access your course by clicking on “My courses” label in the “Navigation” block then select your course
- Click on “users” in the “Course administration” block, and then choose “Groups“
- Click on “Create groups automatically“.
- Enter the naming scheme. For example, Group @ or Group #
- Choose the option “Number of groups“
- Enter the number of groups to create.
- Choose “no allocation” in the allocate members field to not enroll members in these groups (i.e. these groups will be empty.)
- Click on « Submit "
B. CREATING THE GROUP CHOICE ACTIVITY IN YOUR COURSE
- Access your course by clicking on “My courses” label in the “Navigation” block then select your course
- Activate the editing mode by clicking on the “Turn Editing On“
- Create the “Group choice” activity , by clicking on “Add an activity or a resource”
- Choose “Group choice” and click on the “Add” button
C. SETTINGS OF THE GROUP CHOICE ACTIVITY
To configure the Group Choice activity, follow the steps below :
GENERAL
- Enter a name for your activity.
- Enter a description for your activity, which should include specific instructions for students.
MISCELLANEOUS SETTINGS
-
- Allow enrollment to multiple groups
- Publish Results: Choose of the following options :
- Do not publish results to students (In this case, the “Privacy of results” field will be disabled)
- Show results to students after they answer
- Show results to students only after the choice is closed
- Always show results to students
- Privacy of results : Choose of the following options :
- Publish anonymous results, do not show student names
- Publish full results, showing names and their choices
-
- Allow choice to be updated
- Limit the number of responses allowed. If enabled, enter the general limitation (i.e. the maximum number of subscribers to a group)
- Select the available groups and click on “Add groups“
- Click on the “Apply to all groups” button“
-
- Activate the Restrict answering to this time period to choose an opening date and a closing date
Don’t forget to click the “Save and Display” button
D. OVERVIEW OF GROUPS
There are three ways to use groups:
- No groups: There are no groups, everyone is part of a single community.
- Separate groups: Each group can only see its own group, with activity contributions from members of other groups invisible. Please note, this does not mean that the activity will only be accessible to members of such and such a group, but rather that since the activity is accessible to all course members regardless of their group, the members of group A will not be able to consult the contributions of the members of group B. If you want to reserve a particular activity (and specific resources) for a particular group, you have to go through the groups.
- Visible groups: Each user only contributes within their own group, but the contributions of members of other groups are visible in read-only mode.
Group types can be defined at two levels:
-
- Activity: You can define the type of groups at the level of each activity that supports groups.
In the bloc “(activity) administration” on the left, click on “Settings“, then choose group mode.
Don’t forget to click on the “Save and display” button
-
- Course: When the group type is set at the course level, it becomes the default type for all course activities. However, if “Enforce group type” has been set, Moodle ignores the group type defined in the activities.
In the bloc “course administration” on the left, click on “Settings“
-
-
- Choose group mode
- Choose if you want to force group mode
-
Don’t forget to click the “Save and Display” button
E. RESTRICT ACCESS
If you place a restriction on a resource only for a group, only members of that group will be able to access the resource.
In the bloc “(activity) administration” on the left, click on “Settings“, then choose group mode.
- Click on “Add restriction“
- Click on “Group“
- Choose the suitable group
- Click on the “eye” symbol to make the activity visible only to members of the selected group.
Click on “Save and display” button.
CINIA is located on the 7th floor of the USJ Human Sciences Campus on Damascus Street in Beirut.
Don't hesitate to contact us at cinia@usj.edu.lb
or call us at +961 1 421 000 extension 5923/5924.
© 2024 Center for Digital Innovation and AI. Created for free using WordPress and Kubio
